The Tekblog

I thought this may be useful to someone pulling their hair out… Hope it is…

(Tested w/ Avaya 9620L & Sonicwall TZ210 w/ 5.8.1 firmware)

Settings:

VPN Vendor: Other

Gateway Address: Sonicwall WAN IP

AUTH. TYPE

PSK with XAUTH

USER CRED.

VPN User Type: Any

VPN User: <Local Username from Sonicwall> (Created under “Local Users” in SW interface)

Password Type: Save in Flash

PASSWORD ENTRY

<Sonicwall Local User Password>

IKE PSK

IKE ID: GroupVPN (Case Sensitive)

Pre-Shared Key (PSK): <Your GroupVPN Shared Secret> (Case Sensitive [NOTE: You have to advance forward with the right arrow when entering letters that are on the same key – this can be painful)

IKE PHASE 1

IKE ID: FQDN

IKE Xchg Mode: Aggressive

IKE DH Group – 2

IKE Encryption Alg: Any

IKE Auth. Alg. Any

Ike Config Mode: Disabled

IKE Phase 2

IPSec PFS DH Group: No PFS

IPSec Encryption Alg: Any

IPSec Auth Alg. Any

Protected Network: <Example: 192.168.42.0/24>

IKE Over TCP

Ike Over TCP: Auto